Drawing Environment > Detailed command descriptions > Symbol Generator > Specific details for different symbol types > Conventional contact mirror > The differences for a horizontal contact mirror

The same principle that is described for vertical contact mirrors can of course be used for a horizontal contact mirror as well. The description below focuses on the differences from a vertical contact mirror.

Figure 887: The insertion points for the contacts are shown with red crosses in this figure.

The contacts are inserted with the insertion points in a similar way as for the vertical case. Please refer to the figure above.

Figure 888: This is how messy it might look directly after specifying the insertion point. Some adjustments are necessary.

The insertion point is placed 5 mm to the left of the leftmost contact, as shown in the figure above. The result is at least as messy as in the vertical case. First, you can rotate the Symbol object.

Then you can adjust the attributes. For a horizontal contact mirror, its is not enough to move the attributes. You must change the text justification as well. As you can see in the figures above and below, it must be changed from Centre to Left. The Attribute adjustment tool is perfect for that job.

Figure 889: The symbol object has been rotated, and the attributes have been adjusted, both for position and text justification.

Then add the mechanical link, save the symbol, and test it.

Figure 890: The horizontal version of the contact mirror is ready.

The figure above shows the ready-to-use contact mirror.