OnLine Protocol…

The OnLine Protocol is the main error finding feature of cadett ELSA, and it should be used very frequently.

Please refer to the separate OnLine Protocol topic.

Consistency check

The Consistency check feature is used to find errors that are not really errors, when things that by themselves are correct, do not match with one another.

Please refer to the separate Consistency check topic.

Connected symbols

The Connected symbols feature allows you to check individual connection chains directly in the Drawing Environment. It is a highly valuable tool to facilitate finding and correcting drawing errors.

Please refer to the separate Connected symbols topic.

Connection view

The Connection view is a very effective error finding feature for connections. It presents the content of the connection database graphically direct on top of the circuit diagram on the screen. It should be used frequently.

Please refer to the separate Connection View topic.

Undo

This is the standard AutoCAD U command (the same as <CTRL_Z>), adapted for use in the cadett ELSA Drawing Environment. The effect of the last command is repealed. The Undo command can be repeated to repeal multiple commands. Please note that some cadett ELSA macros are composed of multiple commands and therefore require multiple undo’s to be repealed entirely.

Cancel

Cancel is identical with pressing the <ESC> button twice. Any command currently running is aborted.

3 x Undo

The Undo command is repeated 3 times.

5 x Undo

The Undo command is repeated 5 times.

7 x Undo

The Undo command is repeated 7 times.

11 x Undo

The Undo command is repeated 11 times.